Preparation before installation of rotary vibrating screen

Rotary vibrating screen uses motor rotation to generate exciting force, which makes the screen body produce multi-rotating vibration. Its motion trajectory is a complex spatial three-dimensional curve. Adjusting the space and angle of the upper and lower weights can effectively change the trajectory of the substance. , To extend or shorten the residence time of the material on the screen surface to achieve the ideal screening effect.

Preparation before installation of rotary vibrating screen:

1. Check whether the motor label conforms to the requirements.

2. Measure the insulation resistance with a 500 volt megohmmeter. The value should be dried on the stator winding and the drying temperature should not exceed 120°C.

3. Check the fasteners of the motor to prevent loosening.

4. Check whether the surface of the motor is damaged or deformed.

5. Check whether the rotation is flexible. If there is any abnormality, it should be eliminated.

6. Check the power supply to see if it lacks phase, and run it for 5 minutes without load.

Installation and adjustment of rotary vibrating screen:

1. The motor should be fastened to the mounting surface, which must be smooth and flat.

2. The motor can be installed horizontally.

3. The motor lead adopts four-core rubber cable YZ-500V. When connecting to the power supply, the lead-out cable is not allowed to be bent sharply, and is reliably fixed with the vibrating body.

4. The motor should have a reliable grounding. There is a grounding device in the motor, and the lead end has a mark. It can also be grounded by a solid bolt.

5. Adjustment of exciting force.